深圳市鼎腾发电子有限公司

代理JST连接器接插件，端子胶壳，有需要的请与我司联系！现货库存多，单价好，交货及时！灵活处事！

	Series	SH connector
	Type	Disconnectable type, Crimp style, Compact type
	Rate(AC/DC)	Current: 1.0A (AWG#28)     Voltage: 50V
	*Compact, low profile design *Although this shrouded header has locking features for its mating receptacle, there are no holes in the header shroud that would adversely effect vacuum gripping equipment. *The receptacle has protrusions on both ends for an operator to disengage the receptacle from the header without holding the wires.

1.2 mm pitch		Series	ACH connector
		Type	Disconnectable type, Crimp style, Compact type, Low-profile type
		Rate(AC/DC)	Current: 2A/1to3-circuit (AWG#28) 1.5A/4-circuit (AWG#28)     Voltage: 50V
	This connector is compact and low profile type, height: 1.4mm and width 4.3mm, 1.2mm pitch wire-to-board connector.

1.5 mm pitch		Series	ZE connector
		Type	Crimp style, With secure locking device
		Rate(AC/DC)	Current: 2A (AWG#24)     Voltage: 100V
	1.5mm pitch secure lock type connector. Fork-shaped header contact provides the good mating feeling and secure mating operation

1.5 mm pitch		Series	ZH connector
		Type	Disconnectable type, Crimp style, Compact type
		Rate(AC/DC)	Current: 1.0A (AWG#26)     Voltage: 50V
	*Housing lances *The dimple at the center of the contact ensures positive contact and low contact resistance at all times. *Fully shrouded header *The same shrouded header can be used for the ZR insulation displacement connector.

2.0 mm pitch		Series	PA connector
		Type	Disconnectable type, Crimp style, With secure locking device
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: Standard type/250V Retainer mountable type/100V
	2.0mm pitch connector with secure locking device *Secure locking device The housing has a locking device to prevent accidental disconnection because of routing wires or of vibration, and also reverse and different circuit numbers mating.

2.0 mm pitch		Series	PAD connector
		Type	Disconnectable type, Crimp style, Double-row, With secure locking device
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	2.0mm pitch double-row connector with secure locking device *Secure locking device The housing has a locking device to securely hold the header, preventing accidental disconnection because of external forces that might result from the routing of wires during assembly process oe of vibration.

2.0 mm pitch		Series	PH connector
		Type	Disconnectable type, Crimp style, Thin type
		Rate(AC/DC)	Current: 2A (AWG#24)     Voltage: 100V
	*The dimple at the center of the contact ensures positive contact and low contact resistance at all times. *The contact has a long wire strip holding length of 2.6 +/-0.4mm. *Fully shrouded header *The same shrouded header can be used for the KR/KRD/CR insulation displacement connectors.

2.0 mm pitch		Series	PHD connector
		Type	Disconnectable type, Crimp style, Double-row
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	*Double-row construction *The box contact supplies stable contact performance. *Fully shrouded header

2.0 mm pitch		Series	SAN connector
		Type	Board-in connector, Crimp style, Board-in connector
		Rate(AC/DC)	Current: 2A (AWG#24)     Voltage: 250V
	This multi-circuit board-in connector meets the needs for high-density mounting on PC boards efficiently and economically.

2.0 mm pitch		Series	SJN connector
		Type	Board-in connector, Crimp style, Board-in connector
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	Side entry type board-in connector, with a mounting height of only 2.8mm and a thickness of 4.9mm

2.5 mm pitch		Series	EH connector
		Type	Disconnectable type, Crimp style, Thin type
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	It is designed to meet the demand for the high-density connection of internal wires to PC boards.

2.5 mm pitch		Series	HR connector (Crimp style)
		Type	Disconnectable type, Crimp style, Thin type
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	*Thin design *The dimple in the contact ensures positive contact. *The same header can be used for either the HR insulation displacement connector or the EH crimp style connector.

2.5 mm pitch		Series	SCN connector	-> Detail
		Type	Board-in connector, Crimp style, Board-in connector
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	This multi-circuit board-in connector meets the needs for high-density mounting on PC boards efficiently and economically.

2.5 mm pitch		Series	XA connector (High box type)	-> Detail
		Type	Disconnectable type, Crimp style, High-box type, With locking device
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	The header is tall and fully shrouded so as to prevent the resin used to coat the PC board coming into contact with the mating pins. Designed for use specifically with resin coated ('potted') PC boards. *The header is designed to accept XA mating receptacles. *Secure locking device prevents accidental disconnection.

2.5 mm pitch		Series	XA connector (W to B)	-> Detail
		Type	Disconnectable type, Crimp style, With secure locking device
		Rate(AC/DC)	Current: 3A (AWG#22,#20)     Voltage: 250V
	*Secure locking device prevents accidental disconnection. *Header wafer is made of solder crack preventive material, glass-filled PA66 nylon. *Header pins are round and reflow-treated, which provides low insertion force. *Shrouded headers on radial-tape are also available. *Headers with polarizing bosses are also available.

2.5 mm pitch		Series	XAD connector (W to B)	-> Detail
		Type	Disconnectable type, Crimp style, Double-row, With secure locking device
		Rate(AC/DC)	Current: 3A (AWG#20)     Voltage: 250V
	*Double-row construction *Header wafer is made of solder crack preventive material, glass-filled PA66 nylon. *Secure locking device prevents accidental disconnection.

2.5 mm pitch		Series	XH connector	-> Detail
		Type	Disconnectable type, Crimp style, Shrouded header type
		Rate(AC/DC)	Current: 3A (AWG#22)     Voltage: 250V
	This connector was developed based on the high reliability and versatility of our NH series connectors. The connector is very small with mounting height of 9.8mm.

3.96 mm pitch		Series	VH connector	-> Detail
		Type	Disconnectable type, Crimp style, Compact type, With locking device
		Rate(AC/DC)	Current: 10A (AWG#16)     Voltage: 250V
	This small, field-proven connector for PC boards is reliable and has a large current carrying capacity. It can be used with a wide variety of signal, power supply, and output circuits that appear in consumer electronic products.

5.0 mm pitch		Series	NV connector	-> Detail
		Type	Disconnectable type, Crimp style, With locking device
		Rate(AC/DC)	Current: 10A (AWG#16)     Voltage: 250V
	Suitable for a wide range of applications, from low-voltage, low-current signal circuits to power supply circuits requiring large currents.

6.2 mm pitch		Series	VL connector (W to B)	-> Detail
		Type	Disconnectable type, Crimp style, High current rating, With inner type secure locking device
		Rate(AC/DC)	Current: 20A (2circuits/AWG#12)     Voltage: 600V
	Designed for circuits with high power requirements. The VL connectors can be used for wire-to-wire or wire-to-board connections. *The inter-housing lock secures the plug to the receptacle and prevents accidental disconnection. *Secondary retainers(optional)

7.92 mm pitch		Series	VA connector	-> Detail
		Type	Disconnectable type, Crimp style, With locking device
		Rate(AC/DC)	Current: 7A (AWG#18)     Voltage: 250V
	This large current carrying capacity connector can be used with primary power supply circuits of consumer electronic products and various other circuits requiring large currents. *Compact connector (with a mounting height of 17.5mm ) with a large capacity(7A).

11.88 mm pitch		Series	VT connector	-> Detail
		Type	Disconnectable type, Crimp style, With locking device
		Rate(AC/DC)	Current: 12A (AWG#16)     Voltage: 250V
	Can be connected to vinyl insulated flat cables (such as SPT, HVFF) ranging from AWG #20 to 16 which are used for primary sides of power circuits. *PC board locking device makes temporary mounting and correct positioning onto the board easy. *Misinsertion preventive construction and arm-lock mechanism.

	Series	SDF connector	-> Detail
	Type	Disconnectable type, Crimp style, Single-circuit type
	Rate(AC/DC)	Current: 5A
This terminal is used for 1.3mm diameter and 1.0mm square contacts.

	Series	SIN connector	-> Detail
	Type	Board-in connector, Crimp style, Board-in connector, Single-circuit type
	Rate(AC/DC)	Current: Based on the applicable wire size
Various types of terminals are available for wide range of wires, from AWG #30 to 12.