荷兰PBQ蓄电池（中国）有限公司

荷兰PBQ蓄电池

荷兰pbq蓄电池-pbq蓄电池集团（中国）有限公司站，主要生产铅酸免维护蓄电池，胶体蓄电池，主要生产pbq全系列产品pbq general purpose series系列，pbq high rate series系列，pbq long life series系列，pbq gel series系列，pbq front access series系列，pbq single cell series系列，pbq lifepo4 series系列，pbq cyclic series系列，pbq primary lithium series系列，PBQ电池提供广泛的产品系列，以满足客户和潜在客户的要求。PBQ电池包括特殊的VdS认证的电池，循环（深度放电）电池，高倍率电池，单块和前访问模式。除了广泛密封铅酸蓄电池， PBQ还提供锂电池。小型便携式锂电池被提供在所有三个主要化学成分：锂 - 亚硫酰氯，锂锰和锂二氧化硫。我们的研发部门现在还增加了一个新的PBQ磷酸铁锂的γ发展 - PBQ磷酸铁锂电池 。PBQ电池专注于EMEA（欧洲，中东和非洲）市场。在这一地区的发展对于 PBQ电池异常重要。

PBQ battery in Holland - PBQ battery group (China) Co., Ltd. mainly produces lead-acid maintenance free batteries, colloidal batteries, and a full range of PBQ products, including PBQ general purpose series, PBQ high rate series, PBQ long life series, PBQ gel series, PBQ front access series, PBQ single cell series, PBQ LiFePO4 series, PBQ cyclic series, PBQ primary lithium series, PBQ batteries provide a wide range of products to meet the requirements of customers and potential customers. PBQ batteries include special VDS certified batteries, cycle (deep discharge) batteries, high rate batteries, single block and front access modes. In addition to widely sealed lead-acid batteries, PBQ also offers lithium batteries. Small portable lithium batteries are offered in all three main chemical components: lithium thionyl chloride, lithium manganese and lithium sulfur dioxide. Our R & D department has now added a new PBQ lithium iron phosphate γ Development - PBQ LiFePO4 battery. PBQ batteries focus on EMEA (Europe, Middle East and Africa) market. The development in this area is very important for PBQ batteries.

荷兰pbq蓄电池特点：

1、采用紧装配技术，具有优良的高率放电性能。

2、采用特殊的设计，电池在使用过程中电液量几乎不会减少，使用寿命期间完全无需加水。

3、采用独特的耐腐蚀板栅合金、使用寿命长。

4、全部采用高纯原材料，电池自放电极小。

5、采用气体再化合技术，电池具有极高的密封反应效率，无酸雾析出，安全环保，无污染。

6、采用特殊的设计和高可靠的密封技术，确保电池密封，使用安全、可靠。

Characteristics of PBQ battery in Holland:

1. Adopting tight assembly technology, it has excellent high rate discharge performance.

2. With special design, the electro-hydraulic quantity of the battery will not be reduced during use, and no water is needed during the service life.

3. Unique corrosion-resistant grid alloy, long service life.

4. All of them are made of high purity raw materials with small self discharge electrode.

5. Using gas recombination technology, the battery has high sealing reaction efficiency, no acid mist precipitation, safety and environmental protection, no pollution.

6. Special design and high reliable sealing technology are adopted to ensure the battery is sealed, safe and reliable.

Performance and structure characteristics of PBQ batteries in Holland:

荷兰pbq蓄电池性能结构特点：

荷兰pbq蓄电池极板分为正极板和负极板：分类及构成：极板分正极板和负极板两种，均由栅架和填充在其上的活性物质构成。作用：蓄电池充、放电过程中，电能和化学能的相互转换，就是依靠极板上活性物质和电解液中硫酸的化学反应来实现的。  颜色区分：正极板上的活性物质是二氧化铅(PbO2)，呈深棕色；负极板上的活性物质是海绵状纯铅(Pb)，呈青灰色。 栅架的作用：容纳活性物质并使极板成形。   极板组：为增大蓄电池的容量，将多片正、负极板分别并联焊接，组成正、负极板组。安装的特别要求：安装时正负极板相互嵌合，中间插入隔板。在每个单体电池中，负极板的数量总比正极板多一片。隔板的作用是为了减小蓄电池的内阻和尺寸，蓄电池内部正负极板应尽可能地靠近；为了避免彼此接触而短路，正负极板之间要用隔板隔开。 材料要求：隔板材料应具有多孔性和渗透性，且化学性能要稳定，即具有良好的耐酸性和抗氧化性。  材料：常用的隔板材料有木质隔板、微孔橡胶、微孔塑料、玻璃纤维和纸板等

Dutch PBQ battery plate is divided into positive plate and negative plate: classification and composition: plate is divided into positive plate and negative plate, which are composed of grid frame and active material filled on it. Function: in the process of battery charging and discharging, the conversion of electric energy and chemical energy depends on the chemical reaction between the active material on the plate and sulfuric acid in the electrolyte. Color distinction: the active material on the positive plate is lead dioxide (PbO2), which is dark brown; The active material on the negative plate is spongy pure lead (PB), which is cyan gray. The role of the grid: to contain the active material and to shape the plate. Plate group: in order to increase the capacity of the battery, several positive and negative plates are welded in parallel to form positive and negative plate groups. Special requirements for installation: during installation, the positive and negative plates are inlaid with each other, and the clapboard is inserted in the middle. In each cell, there are more negative plates than positive plates. The function of the separator is to reduce the internal resistance and size of the battery, and the positive and negative plates inside the battery should be as close as possible; In order to avoid short circuit caused by contact with each other, the positive and negative plates should be separated by partitions. Material requirements: the diaphragm material should be porous and permeable, and the chemical properties should be stable, that is, it has good acid resistance and oxidation resistance. Materials: commonly used partition materials include wood partition, microporous rubber, microporous plastic, glass fiber and paperboard, etc