软化水设备参数/Softener Parameters |
|
基本参数 /Basic parameters | |
品牌/Brand: | Qiyao |
型号/Model: | QYRH-600 |
控制方式Control mode: | 自动/Automatic |
型式/Type: | 立式/Vertical |
处理能力/capacity | 6.0~8.0m³/h |
滤速/Filtration rate: | 20-30m/h |
再生方式/Regen mode | 顺流/Down flow |
进水硬度/Hardness of Raw water | <6mmol/L |
出水硬度/Hardness of outlet water | <0.03mmol/L |
设计压力/Design pressure: | ≤0.6Mpa |
运行压力/Operating pressure: | 0.2-0.45Mpa |
工作温度/Working temperature: | 5-45℃ |
安放方式/Placed methods: | 放置于地面上/On the floor |
树脂罐体参数/Resin tanks parameters | |
罐体材质/Tank material: | 玻璃钢/FRP |
树脂罐尺寸/Resin tank size: | Φ600*1850mm |
筒体壁厚/thickness: | 10mm |
筒体内衬Inner material : | 食品级PE/Food grade PE |
设计压力Design pressure: | 0.6Mpa |
测试压力Test pressure: | 0.75mpa |
阀门参数/valve parameters | |
阀门型号: | F74 |
进水口/inlet: | 2” |
出水口/outlet: | 2” |
排污口/Drain outlet: | 1” |
吸盐口/Brine line connector: | 1/2” |
与罐体连接基座/base: | 4″-8UN |
盐箱参数/Salt tank parameters | |
盐箱材质/Salt tank material: | 食品级PE/Food grade PE |
盐箱尺寸/Salt tank size: | 直径/Dia:330mm;高度/Height:750mm |
盐箱容积/Volume: | 350L |
吸盐接口/Brine line connector: | 3/8” |
溢流口/Overflow port: | 3/8” |
再生参数/Regeneration parameters | |
再生剂类型/regeneration liquid: | 氯化钠(工业用盐)/Nacl |
再生剂浓度/Concentration: | 饱和盐水/Saturation brine |
吸盐时间/Brine time: | ≥30min |
软化树脂参数/Resin parameters | |
品牌/Brand: | PUROLITE |
型号/Model: | C100E |
外观/Appearance: | 球状颗粒/Spherical beads |
出厂型式/Ionic Form as Shipped: | 钠型/Na+ |
含水量/Moisture Retention: | 45%~50% |
有效粒径/Mean Diameter: | 570 ± 50 µm |
其他附件参数Attachment parameters | |
中心管Riser Pipe: | 材质/material:PVC |
上布水器/Top Strainer: | 材质/material:ABS |
下布水器/Bottom Strainer: | 材质/material:ABS |
吸盐软管/Suction Tube: | 3/8” material/:PE |
钠离子交换器,锅炉软水器,热水器专用软化水设备